Published at Friday, September 07th 2018, 05:07:57 AM by Amparo Rodgers. Futon. When the futon industry was born back in the 1980's, the frames were well thought out and well constructed. Whether it was softwoods or hardwoods, the frames featured good fundamental designs made from solid wood. These futon frames would incorporate new working mechanisms and ideas in operation that made futons appealing not only in their design but in the quality of materials and construction that went into them. The futon industry was doing well and growing with these frames heading into the 1990's but then the black metal futon frame came onto the scene.
Published at Saturday, September 08th 2018, 12:11:37 PM. Futon By Frieda Hays. Mattresses are not the only things that can quickly come off futons; their frames also can be broken down quickly. While this obviously comes in handy when moving a futon to another room, it is also nice when moving it longer distances. Moving regular furniture is very awkward and requires a lot of hands as well as shipping space. The ease in which futons can be broken down means they require a lot less shipping space and fewer hands to move them. This can save on both shipping expense and needless aggravation!
Published at Saturday, September 08th 2018, 11:59:58 AM. Futon By Rhoda Wells. When I first got into the Futon business about six years ago, I was under the impression, as a lot of folks are, that futons weren't nice enough for anywhere other than college dorms and first apartments. Well, things have certainly changed. This is not to say that those unfinished tri-fold frames with thin all cotton futon mattresses don't exist anymore, they do, but there are also some very nice frames, mattresses, and futon covers in today's market.
Published at Saturday, September 08th 2018, 11:48:18 AM. Futon By Patricia Petersen. A lounge sofa can be placed next to a two-seat futon. Then, an end table can be placed in the corner, and a three seat futon can be placed at the long end of the room. This creates a sectional look out of individual pieces of furniture that are more functional separately than a traditional sectional.
Published at Saturday, September 08th 2018, 11:36:39 AM. Futon By Lou Greene. There are a few things that you need to consider if you are looking for a futon. What is my frame made of? How long will my frame last? Always look for a futon frame that is made from solid hardwoods, avoid any frames that are made from particle board or MDF. Measure width and the distance between the slats on the back and seat decks. Slats should be at least two and a half inches wide and if the spacing is more than three inches, forget it. Even with the best mattress on the market you'll feel slats that are too thin, or to far apart. If you use a futon frame with substandard, unsupported slats you run the risk of ruining your mattress. Try to look for frames that feature mortise and tennon joinery and metal on metal connections, they'll only add to the life of your frame.
Published at Saturday, September 08th 2018, 11:24:59 AM. Futon By Louella Weiss. With more traditional furniture, the inner frame is covered and very difficult to access. The makes any type of home repairs extremely irritating at best. Futons are very open though and everything is easily accessible. Often, repairs to the frame can be made by novices and parts replaced at low cost.
Published at Saturday, September 08th 2018, 11:13:18 AM. Futon By Sally Mcfarland. Natural fibers, cotton and linen are nice and soft to begin with, but can wear faster than synthetics. Synthetic fibers; polyester, nylon, rayon and such; might not be quite as soft but they last longer than natural fibers. Synthetic fibers have come a long way, they are constantly being improved and they hold vivid dyes that cotton and linen can't. A good compromise between Natural and Synthetic fibers is blends of the two, which are in abundance in the futon cover market.
Published at Saturday, September 08th 2018, 11:01:40 AM. Futon By Lou Greene. The advantage that futons have over conventional furniture is in the assembly of these frames. Because they come flat in about six primary parts they are easy to get around tough corners in a home or into tight spaces where most furniture can't go. Why is this important? Most upholstered furniture can't be easily disassembled to fit through tight spaces. Futons can, and can easily. In most cases you simply take each part in one at a time and then assemble it in the room. What could be easier?